Lattice girders for the UNIFIX façade scaffolding system

Structural conditions such as entrance gates or annexes often require special scaffolding structures. Standard components often do not fit these needs. Lattice girders, available in standard lengths of up to 8.10 m (aluminium) and up to 7.60 m (steel, hot-dip galvanized) serve these purposes. Lattice girders are also used in shoring scaffolding with heavy loads and in areal scaffoldings. The load-bearing capacity of lattice girder structures is determined by the unsupported length and the type of lattice girder.

Structural conditions such as entrance gates or annexes often require special scaffolding structures. Standard components often do not fit these needs. Lattice girders, available in standard... read more »
Close window
Lattice girders for the UNIFIX façade scaffolding system

Structural conditions such as entrance gates or annexes often require special scaffolding structures. Standard components often do not fit these needs. Lattice girders, available in standard lengths of up to 8.10 m (aluminium) and up to 7.60 m (steel, hot-dip galvanized) serve these purposes. Lattice girders are also used in shoring scaffolding with heavy loads and in areal scaffoldings. The load-bearing capacity of lattice girder structures is determined by the unsupported length and the type of lattice girder.

Close filters
from to
No results were found for the filter!
NEW
Tube connector for lattice girder 0.41 m, steel, galvanised
Tube connector for lattice girder 0.41 m,...
- with 4 screws M 14 x 65 mm and nuts M14
€28.45 *
NEW
Attachment piece for lattice girder 0.30 m, steel, galvanised
Attachment piece for lattice girder 0.30 m,...
- with boreholes for locking pins
€38.20 *
NEW
Wall connector plate for lattice girder 0.70 m, steel, galvanised
Wall connector plate for lattice girder 0.70 m,...
- version with U-profile, 120 mm - for fixation at the ends of lattice girders to buildings, mainly for special solutions - fixation in accordance with anchorage ground and load, proof required for each individual case
€101.80 *
NEW
UNIFIX lattice girder, steel, galvanised
UNIFIX lattice girder, steel, galvanised
- system-independent assembly in the façade scaffolding for construction-related bridging purposes (passages, etc.) - load-bearing capacity depends on material and bridging length - for load-bearing capacity table please refer to...
From €203.80 *
NEW
UNIFIX lattice girder, aluminium
UNIFIX lattice girder, aluminium
- system-independent assembly in the façade scaffolding for construction-related bridging purposes (passages, etc.) - load-bearing capacity depends on material and bridging length - for load-bearing capacity table please refer to...
From €221.35 *
NEW
UNIFIX lattice girder cross brace, steel, galvanised
UNIFIX lattice girder cross brace, steel,...
- includes 2 linchpins - for use with bridging constructions in the façade scaffolding -lift-off prevention with safety bolts - for use with system-independent lattice girders as an alternative to screwed half frames
From €147.60 *
NEW
UNIFIX lattice girder suspension, steel, galvanised
UNIFIX lattice girder suspension, steel,...
- for fixing system-independent lattice girders to the assembly frames in case of standard bridging
€46.05 *
NEW
UNIFIX bridging girder, steel, galvanised
UNIFIX bridging girder, steel, galvanised
- steel tube ø 48.3 mm - with 4 welded-on halfcouplers and welded tube connectors for accommodating the assembly frames for further construction in the scaffolding standard dimension
From €407.45 *
NEW
UNIFIX supporting tubing, steel, galvanised
UNIFIX supporting tubing, steel, galvanised
- screwed onto lattice girder - serves to accommodate system decks for constructing areal scaffoldings
From €52.80 *