to secure the telescopic scaffold stabiliser to the ground

- with integrated halfcoupler WS 19 - for all scaffolding systems up to deck widths 0.65 and 1.00 m

- max. load capacity: 10kN - with twin break - centric load transfer - with thread for continuing height adjustment - secured by means of wing screw

- system-independent assembly in the façade scaffolding for construction-related bridging purposes (passages, etc.) - load-bearing capacity depends on material and bridging length - for load-bearing capacity table please refer to...

- system-independent assembly in the façade scaffolding for construction-related bridging purposes (passages, etc.) - load-bearing capacity depends on material and bridging length - for load-bearing capacity table please refer to...

allows anchorage despite installed bracket on the same level

- for fixing the eaves ledger / guardrail

to connect two assembly frames in case of specific axial distances

- for use as safety bolt in connection with hexagon acorn nut

steel, hot-dip galvanised, required when using couplers

steel, hot-dip galvanised, required when using couplers

- support of free standing scaffoldings with platform heights of up to 6.00 m - integrated stiffening for secure connection to scaffolding - locking pin to easily fix the diagonal tube in different extension lengths

- special carabiner for use with scaffoldings - comes in useful pvc device bag - safety harness Revolution R2 Scaff, 2.50 m, safety rope Manyard Edge

- with integrated Pivot Link attachment point for secure attachment to safety harness

- galvanized - base plate 15 x 15 cm - threaded tube 38 mm

- universal size - adjustable - manufacturer: Kong, type: Mouse Work

to seal the sleeve tubing after removing the EIFS anchor, covers the sleeve tube

- with snap-in lock

- natural

for anchoring in case of different tube sizes in connection with EIFS anchor sleeve, for connecting tubes with different diameters

- for construction of side protection - with fixture for guardrail wedge housings - borehole in fixture hook allows using the guardrails also as horizontal struts

- steel, hot-dip galvanised

for universal use, e.g. as bracing element

- assembly with 2 standard couplers on both upright tubes for lengths of 1.00 m and above - with borehole for locking by means of linchpin - EIFS anchor sleeve required for lengths of 1.00 m and above