No results were found for the filter!
Castor 0.50 m, steel, 10 KN, ø 200 mm, galvanised
- max. load capacity: 10kN - with twin break - centric load transfer - with thread for continuing height adjustment - secured by means of wing screw
€169.80
*
Base jack 0.60 m, steel, galvanised, swivelling
- galvanized - base plate 15 x 15 cm - threaded tube 38 mm
€49.95
*
NEW
ALBLITZ base jack, steel, galvanised
- with smooth running tube spindle and toggle nut - locking function to prevent unfastening - base plate 15 x 15 cm - threaded tube 38 mm - max. spindle travel 0.25 m
From €20.35
*
Spacer tube 1.80 m, steel, galvanised
- adjustment function, e.g. with downward stairway - multiple height adjustment possibilities thanks to 120 mm hole raster - secured by means of locking pin
€48.40
*
Rolling beam, mobile and universally...
- with 2 displaceable tube connectors for system-independent use
From €91.95
*
Flange castor 0.70 m, steel, ø 200 mm, galvanised
- max. load capacity: 7 kN - with plastic wheel
€330.45
*
VARIO castor 0.50 m, steel, rail-guided, ø 200...
- with halfcoupler to wheel axle on one side for track stability - max. load-bearing capacity 10kN
€209.35
*
Ballast weight holder with halfcoupler 0.17 m,...
- for a max. of 4 universal ballast weights - with wing nut M14
€31.35
*
Universal ballast weight 0.20 x 0.20 m, steel,...
- for assembling onto the ballast weight holder with half coupler - in connection with ballast weight holder with halfcoupler universally usable for ballasting
€60.40
*
Protective base for base jack, polypropylene,...
- guarantees safe and non-slip working - with two reflectors on the sides - no load distributing effect
€5.05
*
ALFIX MODUL head jack U, steel, galvanised
- opening width 160 mm, support length 150 mm - boreholes for fixing formwork girders - max. spindle travel 0.45 m
From €51.20
*
Protective base for base jack, polypropylene,...
- inclination of 5° for adjustments to inclined undergrounds - stackable for the purpose of varying the angle of inclination - with reflector
€6.15
*