Close filters
from to
2 From 10
No results were found for the filter!
NEW
Swivel coupler 48/48
Swivel coupler 48/48
- for connections at any angle
€11.70 *
NEW
Half-coupler
Half-coupler
- with collar nut
€9.70 *
NEW
Guardrail coupler 48/-
Guardrail coupler 48/-
- steel, hot-dip galvanised
€21.95 *
NEW
Combination coupler
Combination coupler
- with threaded bolt M 16 x 120 mm, with washer 60 x 60 and nuts M 16
€21.95 *
NEW
Claw coupler
Claw coupler
- claw opening 35 mm
€20.70 *
NEW
Universal tube connector 0.24 m, clampable
Universal tube connector 0.24 m, clampable
- consists of 2 half-shells and screws - expanded by screw - for connecting tubes subject to impact stress
€15.65 *
NEW
Tube connector for tension coupler
Tube connector for tension coupler
- for tension couplers
€7.65 *
NEW
Tension coupler 48/48
Tension coupler 48/48
- with collar nut
€19.70 *
NEW
Halfcoupler with toeboard bolt
Halfcoupler with toeboard bolt
- steel, hot-dip galvanised
€20.20 *
NEW
ALFIX gusset coupler WS 19
ALFIX gusset coupler WS 19
allows anchorage despite installed bracket, connected to the second hole of the gusset plate
€15.65 *
NEW
Squared timber coupler
Squared timber coupler
- plate: 100 x 220 x 80 mm - with swivel halfcouplers and 4 boreholes 12 mm
€21.50 *
NEW
Halfcoupler with hook
Halfcoupler with hook
- steel, hot-dip galvanised
€19.35 *
NEW
ALFIX anchor coupler 48/- WS 19
ALFIX anchor coupler 48/- WS 19
- steel
€17.90 *
NEW
ALFIX lattice girder 0.45 m, steel, galvanised
ALFIX lattice girder 0.45 m, steel, galvanised
- system-independent assembly in the façade scaffolding for construction-related bridging purposes (passages, etc.) - load-bearing capacity depends on material and bridging length - for load-bearing capacity table please refer to...
From €208.70 *
NEW
ALFIX lattice girder, aluminium
ALFIX lattice girder, aluminium
- system-independent assembly in the façade scaffolding for construction-related bridging purposes (passages, etc.) - load-bearing capacity depends on material and bridging length - for load-bearing capacity table please refer to...
From €221.45 *
NEW
ALFIX lattice girder cross brace, steel, galvanised
ALFIX lattice girder cross brace, steel,...
- U-profile for accommodating system decks - protection against unintended lift-off with safety bolts - for bridging applications in façade scaffoldings - for use with system-independent lattice girders as an alternative to screwed-on...
From €82.80 *
NEW
Tube connector for lattice girder 0.41 m, steel, galvanised
Tube connector for lattice girder 0.41 m,...
- with 4 screws M 14 x 65 mm and nuts M14
€28.45 *
NEW
ALFIX lattice girder suspension 0.53 m, steel, galvanised
ALFIX lattice girder suspension 0.53 m, steel,...
- fixture of system-independent lattice girders to assembly frames for standard bridging functions
€50.60 *
NEW
Attachment piece for lattice girder 0.30 m, steel, galvanised
Attachment piece for lattice girder 0.30 m,...
- with boreholes for locking pins
€38.20 *
NEW
Wall connector plate for lattice girder 0.70 m, steel, galvanised
Wall connector plate for lattice girder 0.70 m,...
- version with U-profile, 120 mm - for fixation at the ends of lattice girders to buildings, mainly for special solutions - fixation in accordance with anchorage ground and load, proof required for each individual case
€101.80 *
NEW
ALFIX U-profile, aluminium, with halfcouplers
ALFIX U-profile, aluminium, with halfcouplers
- U-profile for accommodating system decks - for screwing onto the upper chord of the lattice girder - main use: independent work scaffolds
From €32.65 *
NEW
ALBLITZ lightweight deck 0.60 m, aluminium
ALBLITZ lightweight deck 0.60 m, aluminium
- profile height approx. 50 mm - combination of hollow chamber profiles and aluminium treadplate - anti-slip tread surface, easily stackable, lightweight
From €155.30 *
NEW
Spring clip 2.00 mm, steel, galvanised
Spring clip 2.00 mm, steel, galvanised
serves as lift-off prevention for the locking pin when 2 steel planks are connected
€1.65 *
NEW
ALFIX corner deck 0.60 m, aluminium, 45-90° adjustable, with toeboard, treadplate decking
ALFIX corner deck 0.60 m, aluminium, 45-90°...
to cover corner sections, for angles 45°- 90°
€448.35 *
2 From 10