COUPLERS FOR THE ALFIX FAÇADE SCAFFOLDING

In the scaffolding system, couplers serve as connecting elements. The couplers used comply with the DIN EN 74 standard and are approved by the respective manufacturer. Screw couplers must be tightened with a torque of 50 Nm. At a lever arm of 25 cm, 50 Nm correspond to a force of 20 kg.

In the scaffolding system, couplers serve as connecting elements. The couplers used comply with the DIN EN 74 standard and are approved by the respective manufacturer. Screw couplers must be... read more »
Close window
COUPLERS FOR THE ALFIX FAÇADE SCAFFOLDING

In the scaffolding system, couplers serve as connecting elements. The couplers used comply with the DIN EN 74 standard and are approved by the respective manufacturer. Screw couplers must be tightened with a torque of 50 Nm. At a lever arm of 25 cm, 50 Nm correspond to a force of 20 kg.

Close filters
from to
No results were found for the filter!
NEW
Standard coupler 48/48
Standard coupler 48/48
- for right-angle connections
€9.45 *
NEW
Swivel coupler 48/48
Swivel coupler 48/48
- for connections at any angle
€11.70 *
NEW
Half-coupler
Half-coupler
- with collar nut
€9.70 *
NEW
Guardrail coupler 48/-
Guardrail coupler 48/-
- steel, hot-dip galvanised
€21.95 *
NEW
Combination coupler
Combination coupler
- with threaded bolt M 16 x 120 mm, with washer 60 x 60 and nuts M 16
€21.95 *
NEW
Claw coupler
Claw coupler
- claw opening 35 mm
€20.70 *
NEW
Universal tube connector 0.24 m, clampable
Universal tube connector 0.24 m, clampable
- consists of 2 half-shells and screws - expanded by screw - for connecting tubes subject to impact stress
€15.65 *
NEW
Tube connector for tension coupler
Tube connector for tension coupler
- for tension couplers
€7.65 *
NEW
Tension coupler 48/48
Tension coupler 48/48
- with collar nut
€19.70 *
NEW
Halfcoupler with toeboard bolt
Halfcoupler with toeboard bolt
- steel, hot-dip galvanised
€20.20 *
NEW
ALFIX gusset coupler WS 19
ALFIX gusset coupler WS 19
allows anchorage despite installed bracket, connected to the second hole of the gusset plate
€15.65 *
NEW
Squared timber coupler
Squared timber coupler
- plate: 100 x 220 x 80 mm - with swivel halfcouplers and 4 boreholes 12 mm
€21.50 *
NEW
Halfcoupler with hook
Halfcoupler with hook
- steel, hot-dip galvanised
€19.35 *
NEW
ALFIX anchor coupler 48/- WS 19
ALFIX anchor coupler 48/- WS 19
- steel
€17.90 *
NEW
Hexagon bolt
Hexagon bolt
- for use as safety bolt in connection with hexagon acorn nut
From €1.20 *
NEW
Hexagon dimed cap nut M 14, steel, galvanised
Hexagon dimed cap nut M 14, steel, galvanised
steel, hot-dip galvanised
€1.85 *
NEW
Standard reduction coupler
Standard reduction coupler
- steel, hot-dip galvanised
€18.60 *
NEW
Clamp coupler, universal design, WS 19
Clamp coupler, universal design, WS 19
- for fixing the gap cover
€30.10 *
NEW