No results were found for the filter!
ALFIX horizontal strut, steel, galvanised, with...
- for the lower horizontal connection in a diagonal bay
From €52.60
*
ALFIX diagonal brace, steel, galvanised, with...
- stiffening of scaffolding - Alignment of assembly frames possible for single-sided suspension in gusset, except for bay length 1.57 m and 4.14 m
From €44.10
*
Castor 0.50 m, steel, 10 KN, ø 200 mm, galvanised
- max. load capacity: 10kN - with twin break - centric load transfer - with thread for continuing height adjustment - secured by means of wing screw
€128.10
*
Base jack 0.60 m, steel, galvanised, swivelling
- galvanized - base plate 15 x 15 cm - threaded tube 38 mm
€35.50
*
ALFIX diagonal brace, steel, galvanised, with...
- for the lower horizontal connection in a diagonal bay
From €52.60
*
ALFIX diagonal brace, steel, galvanised, with...
- stiffening of scaffolding - Alignment of assembly frames possible for single-sided suspension in gusset, except for bay length 1.57 m and 4.14 m
From €29.70
*
ALFIX diagonal brace, steel, galvanised, with...
- stiffening of scaffolding - Alignment of assembly frames possible for single-sided suspension in gusset, except for bay length 1.57 m and 4.14 m
From €29.70
*
ALFIX transom, steel, galvanised
- U-profile with halfcouplers for accommodating decks at intermediate levels or directly above the lift-off preventer of assembly frames with the purpose of building a deck surface for storey ladders - with notch for receiving the...
From €40.20
*
ALFIX quick-release anchor 0.65 m, steel,...
- with hooks and guide plate to secure against rotation for suspension below the U-profile - flexible wall distance - fixture by means of standard coupler
€13.00
*
Distance tube, steel, galvanised
- assembly with 2 standard couplers on both upright tubes for lengths of 1.00 m and above - with borehole for locking by means of linchpin - EIFS anchor sleeve required for lengths of 1.00 m and above
From €9.90
*
ALBLITZ base jack, steel, galvanised
- with smooth running tube spindle and toggle nut - locking function to prevent unfastening - base plate 15 x 15 cm - threaded tube 38 mm - max. spindle travel 0.25 m
From €14.40
*
Spacer tube 1.80 m, steel, galvanised
- adjustment function, e.g. with downward stairway - multiple height adjustment possibilities thanks to 120 mm hole raster - secured by means of locking pin
€34.40
*
ALFIX mobile beam 2.00 m, steel
- with differently arranged tube connectors for central and lateral scaffolding
€120.40
*
Rolling beam, mobile and universally...
- with 2 displaceable tube connectors for system-independent use
From €65.40
*