LATTICE GIRDERS FOR THE ALFIX FAÇADE SCAFFOLDING

Lattice girders are produced out of hot-dip galvanized steel or lightweight aluminium and can be delivered in lengths up to 8.20 m (aluminium). They enable the bridging of structural conditions such as passages.

Lattice girders are also used in supporting structures with heavy loads or in areal scaffolding. The load-bearing capacity depends on the unsupported length and the type of the lattice girder used.

Lattice girders are produced out of hot-dip galvanized steel or lightweight aluminium and can be delivered in lengths up to 8.20 m (aluminium). They enable the bridging of structural conditions... read more »
Close window
LATTICE GIRDERS FOR THE ALFIX FAÇADE SCAFFOLDING

Lattice girders are produced out of hot-dip galvanized steel or lightweight aluminium and can be delivered in lengths up to 8.20 m (aluminium). They enable the bridging of structural conditions such as passages.

Lattice girders are also used in supporting structures with heavy loads or in areal scaffolding. The load-bearing capacity depends on the unsupported length and the type of the lattice girder used.

Close filters
from to
No results were found for the filter!
NEW
ALFIX lattice girder 0.45 m, steel, galvanised
ALFIX lattice girder 0.45 m, steel, galvanised
- system-independent assembly in the façade scaffolding for construction-related bridging purposes (passages, etc.) - Load-bearing capacity depends on material and bridging length - for load-bearing capacity table please refer to...
From €148.50 *
NEW
ALFIX lattice girder, aluminium
ALFIX lattice girder, aluminium
- system-independent assembly in the façade scaffolding for construction-related bridging purposes (passages, etc.) - Load-bearing capacity depends on material and bridging length - for load-bearing capacity table please refer to...
From €157.60 *
NEW
ALFIX lattice girder cross brace, steel, galvanised
ALFIX lattice girder cross brace, steel,...
- U-profile for accommodating system decks - protection against unintended lift-off with safety bolts - for bridging applications in façade scaffoldings - for use with system-independent lattice girders as an alternative to screwed-on...
From €58.90 *
NEW
Tube connector for lattice girder 0.41 m, steel, galvanised
Tube connector for lattice girder 0.41 m,...
- with 4 screws M 14 x 65 mm and nuts M14
€21.30 *
NEW
ALFIX lattice girder suspension 0.53 m, steel, galvanised
ALFIX lattice girder suspension 0.53 m, steel,...
- fixture of system-independent lattice girders to assembly frames for standard bridging functions
€35.95 *
NEW
Attachment piece for lattice girder 0.30 m, steel, galvanised
Attachment piece for lattice girder 0.30 m,...
- with boreholes for locking pins
€27.15 *
NEW
Wall connector plate for lattice girder 0.70 m, steel, galvanised
Wall connector plate for lattice girder 0.70 m,...
- version with U-profile, 120 mm - for fixation at the ends of lattice girders to buildings, mainly for special solutions - fixation in accordance with anchorage ground and load, proof required for each individual case
€72.40 *
NEW
ALFIX U-profile, aluminium, with halfcouplers
ALFIX U-profile, aluminium, with halfcouplers
- U-profile for accommodating system decks - for screwing onto the upper chord of the lattice girder - main use: surface-oriented work scaffoldings
From €30.80 *