No results were found for the filter!
NEW
NEW
NEW
NEW
NEW
NEW
- consists of 2 half-shells and screws - expanded by screw - for connecting tubes subject to impact stress
€15.65
*
NEW
NEW
NEW
NEW
allows anchorage despite installed bracket, connected to the second hole of the gusset plate
€15.65
*
NEW
- plate: 100 x 220 x 80 mm - with swivel halfcouplers and 4 boreholes 12 mm
€21.50
*
NEW
NEW
NEW
- system-independent assembly in the façade scaffolding for construction-related bridging purposes (passages, etc.) - load-bearing capacity depends on material and bridging length - for load-bearing capacity table please refer to...
From €208.70
*
NEW
- system-independent assembly in the façade scaffolding for construction-related bridging purposes (passages, etc.) - load-bearing capacity depends on material and bridging length - for load-bearing capacity table please refer to...
From €221.45
*
NEW
- U-profile for accommodating system decks - protection against unintended lift-off with safety bolts - for bridging applications in façade scaffoldings - for use with system-independent lattice girders as an alternative to screwed-on...
From €82.80
*
NEW
NEW
- fixture of system-independent lattice girders to assembly frames for standard bridging functions
€50.60
*
NEW
NEW
- version with U-profile, 120 mm - for fixation at the ends of lattice girders to buildings, mainly for special solutions - fixation in accordance with anchorage ground and load, proof required for each individual case
€101.80
*
NEW
- U-profile for accommodating system decks - for screwing onto the upper chord of the lattice girder - main use: independent work scaffolds
From €32.65
*
- profile height approx. 50 mm - combination of hollow chamber profiles and aluminium treadplate - anti-slip tread surface, easily stackable, lightweight
From €172.30
*
NEW
serves as lift-off prevention for the locking pin when 2 steel planks are connected
€1.65
*
NEW
to cover corner sections, for angles 45°- 90°
€448.35
*