ALFIX assembly frame

The ALFIX assembly frame is a 100% prefabricated frame consisting of tubes and profiles that serves as a basic unit for erecting the ALFIX façade scaffolding. The frame provides for a set level height in two system widths and is available in hot-dip galvanised steel or lightweight aluminium. The lower transverse profile secures the underlying decks against unintentional lift-off. The integrated dislocation lock in the upper transverse ledger secures the decks against unintentional shifting. The tube connectors allow for easy frame assembly.

Standard widths: 0.73 m and 1.09 m

Close window

Standard widths: 0.73 m and 1.09 m

Filter

No results were found for the filter!

NEW

ALFIX assembly frame 0.73 m, steel

- tube profiles ø 48.3 x 2.7 mm - basic component for construction of façade scaffolding - pressed-in tube connectors allow stacking of multiple components - lower transom serves to prevent decking of storey level below from lifting off...

From €80.70 *

NEW

ALFIX assembly frame 2.00 x 0.73 m, steel, with...

- steel tube 48.3 x 2.7 mm - for three-part external and internal side protection

€116.65 *

NEW

ALFIX assembly frame 0.73 m, aluminium

- tube profiles ø 48.3 x 4.0 mm - basic component for construction of façade scaffolding - pressed-in tube connectors allow stacking of multiple components - lower transom serves to prevent decking of storey level below from lifting off...

From €93.20 *

NEW

ALFIX assembly frame 1.09 m, steel, galvanised

- tube profiles ø 48.3 x 3.2 mm - basic component for construction of façade scaffolding - pressed-in tube connectors allow stacking of multiple components - lower transom serves to prevent decking of storey level below from lifting off...

From €97.70 *

NEW

ALFIX assembly frame 2.00 x 1.09 m, steel, with...

- for three-part external and internal side protection - width 1.09 m for width class W09

€136.60 *

NEW

ALFIX cantilever frame, steel

- allows easy scaffolding around façade projections and easy working above protruding eaves

€184.55 *

NEW

ALFIX roof guard extension frame 2.00 x 0.73 m...

- tube connector that can be unscrewed allows for further construction with the dimensions 0.73 m and 1.09 m - assembly of internal bracket: lift-off preventer required - guardrail wedge housings and toeboard pins mounted on both sides...

€182.30 *

NEW

ALFIX lift-off preventer for bracket, steel,...

- lift-off prevention of deck on cantilever of roof guard extension frame

From €14.45 *

NEW

ALFIX passage frame 2.20 x 1.57 m, steel,...

- 1.50 m passageway for pedestrians, safe pedestrian traffic under the scaffolding - securing of the tubular posts by means of locking pins and linchpins 12 x 70 mm, space-saving transport - guardrail wedge housings mounted on both sides...

€260.05 *

NEW

ALFIX assembly frame 2.00 x 0.37 m, steel,...

- with screwed on tube connector - for use in small recesses - can be used as cantilever frame in connection with special bracket and 0.36 m bracket

€105.05 *

NEW

ALFIX DS bracket frame, steel, galvanised

- innovative special component - the DS bracket frame with its construction height of 0.99 m also serves as an adjustment frame, its use makes additional adjustment frames obsolete

From €154.15 *

NEW

DS storey ladder 1.00 m, steel, galvanised

- with telescopic guardrail post extendable to up to 2.00 m to allow safe access to top storey

€101.70 *