No results were found for the filter!
UNIFIX aluminium frame platform 0.64 m with...
- waterproof film-coated plywood surface - interchangeable suspensions and deck surfaces - convenient and reliable ladder and hatch locking mechanism
From €302.30 *
UNIFIX initial platform stairway 1.40 x 1.00 m,...
- at the platform with system-related suspension - bottom part with tube fittings for accommodating base jacks, width 0.62 m
UNIFIX stairway 0.64 m, aluminium
- with system fixture - width 0.64 m:-10 inclinations of 20 cm each,- load-bearing capacity max. 2kN/m² (load class 3) - for use with platform stairway tower
From €334.20 *
UNIFIX telescopic rear guardrail 1.50 - 2.50 m,...
- continuously adjustable by means of telescopic tube - linchpin with snap-on lock for transport security included
UNIFIX double end guardrail, steel, galvanised
- for use as side protection at the end sides
From €29.20 *
UNIFIX end toeboard, wood
- made of impregnated wood - attached to toeboard pins or toeboard coupler - with claws
From €14.00 *
UNIFIX safety side meshguard 1.00 m, steel,...
- with fixture for tilting pins - for use in roof fall arrest and brick guard scaffolds - if used at the safety net support, two side-protection meshguards each are to be mounted one above the other
From €120.00 *
UNIFIX guard net system 2.00 m, mesh size 100...
- ready for mounting - with guardrail and aluminium tube with tube connector - fixation on left and right side by means of integrated fixation cords
From €146.75 *
UNIFIX safety meshguard post 2.00 m, steel,...
- with 6 tilting pins each for fixing safety nets or guard net systems - for use in roof fall arrest and brick guard scaffolds
From €81.50 *
UNIFIX diagonal brace for bay height 2.00 m,...
- suspension by means of tilting pins of the assembly frames - steel tube ø 42.4 mm or ø 57.0 (for a 4.00 m bay) - for vertical stiffening of the scaffolding
From €24.00 *
UNIFIX lower diagonal brace fixture, steel,...
- serves as lower suspension for diagonal braces or for accommodating guardrails used as horizontal strut
UNIFIX quick-release anchor 0.70 m, steel,...
- with hooks and guide plate to secure against rotation - for suspension below the deck transom
UNIFIX rolling beam 2.00 m, steel, galvanised
- for erecting mobile scaffoldings -with differently arranged tube connectors for central and lateral scaffolding
UNIFIX bracket, steel, galvanised, without tube...
- serve to widen or extend the scaffolding in- and outwards / with pins for suspending system decks - for minimizing the wall distance e.g. in case of insulation works - in connection with the steel intermediate deck - for widening the...
From €27.90 *
UNIFIX internal corner bracket 0.25 m, steel,...
- with special design locking pin - for obstacle-free circulation at an internal corner façade scaffolding - allows for use of system components for the side protection instead of tube coupler constructions
UNIFIX bridging girder, steel, galvanised
- steel tube ø 48.3 mm - with 4 welded-on halfcouplers and welded tube connectors for accommodating the assembly frames for further construction in the scaffolding standard dimension
From €290.00 *
UNIFIX supporting tubing, steel, galvanised
- screwed onto lattice girder - serves to accommodate system decks for constructing areal scaffoldings
From €37.50 *
UNIFIX weather protection support 2.00 m,...
- add-on unit as easy weather protection on façade scaffoldings - connection of multiple weather protection supports below on another is done by means of guardrail
UNIFIX weather protection add-on unit 2.00 m,...
- for mounting onto assembly frames of system width 0.74 m - fastening of the scaffolding protection tarpaulin by means of cable ties - connection of multiple weather protection add-on units among each other by means of guardrail - roof...
UNIFIX advanced guardrail post 2.00 m, steel,...
- safety equipment for constructing/disassembling scaffoldings - for all compatible scaffolding systems