Assembly frames for the UNIFIX façade scaffolding system

The basic unit for erecting the UNIFIX façade scaffolding is the prefabricated assembly frame which consists of stable vertical and horizontal tube profiles. It is available in hot-dip galvanized steel or in lightweight aluminium. Prefabricated components make for a standard storey height and two standard widths. The lower transverse profile secures the underlying decks against unintentional lift-off.

Pressed-in tube connectors allow for smooth fitting of components.

Standard widths: 0.74 m and 1.10 m

The basic unit for erecting the UNIFIX façade scaffolding is the prefabricated assembly frame which consists of stable vertical and horizontal tube profiles. It is available in hot-dip galvanized... read more »
Close window
Assembly frames for the UNIFIX façade scaffolding system

The basic unit for erecting the UNIFIX façade scaffolding is the prefabricated assembly frame which consists of stable vertical and horizontal tube profiles. It is available in hot-dip galvanized steel or in lightweight aluminium. Prefabricated components make for a standard storey height and two standard widths. The lower transverse profile secures the underlying decks against unintentional lift-off.

Pressed-in tube connectors allow for smooth fitting of components.

Standard widths: 0.74 m and 1.10 m

Close filters
from to
No results were found for the filter!
NEW
UNIFIX assembly frame with tilting pins on one side 0.74 m, steel, lightweight, galvanised
UNIFIX assembly frame with tilting pins on one...
- with 8 pins for suspending the decks - basic component for the construction of the façade scaffolding - pressed-in tube connectors allow stacking one above the other - lower transom serves to prevent decks of storey level below from...
From €90.70 *
NEW
UNIFIX assembly frame 0.74 m, aluminium
UNIFIX assembly frame 0.74 m, aluminium
- with 8 pins for suspending the decks - basic component for the construction of the façade scaffolding - pressed-in tube connectors allow stacking one above the other - lower transom serves to prevent decks of storey level below from...
From €120.15 *
NEW
UNIFIX assembly frame 1.10 m, steel, galvanised
UNIFIX assembly frame 1.10 m, steel, galvanised
- basic component for the construction of the façade scaffolding - pressed-in tube connectors allow stacking of multiple components - lower transom serves to prevent decking of storey level below from lifting off - U-profile for deck...
From €107.55 *
NEW
DS storey ladder 1.00 m, steel, galvanised
DS storey ladder 1.00 m, steel, galvanised
- with telescopic guardrail post extendable to up to 2.00 m to allow safe access to top storey
€101.70 *
NEW
UNIFIX cantilever frame 2.00 m, steel, lightweight, galvanised
UNIFIX cantilever frame 2.00 m, steel,...
- makes for easy scaffolding around façade projections and easy working above protruding eaves
€141.95 *
NEW
UNIFIX roof guard extension frame 2.00 x 0.74 - 1.10 m, steel, galvanised
UNIFIX roof guard extension frame 2.00 x 0.74 -...
- also allows for further construction in 1.10 dimension - in- and outward bracket widening possible due to tilting pins and toeboard pins attached on both sides
€151.10 *
NEW
UNIFIX passage frame 2.00 m, steel, 3-part, galvanised
UNIFIX passage frame 2.00 m, steel, 3-part,...
- tilting pins attached on both sides enable inner and outer assembly of the side protection - space-saving transport
From €284.70 *
NEW
UNIFIX transition frame 2.00 x 0.41 m - 0.74 m, steel
UNIFIX transition frame 2.00 x 0.41 m - 0.74 m,...
avoids troublesome scaffolding of projected façade sections
€140.40 *
NEW
UNIFIX assembly frame 2.00 x 0.41 m, steel, lightweight, galvanised
UNIFIX assembly frame 2.00 x 0.41 m, steel,...
- for use in narrow recesses
€107.40 *
NEW
UNIFIX DS bracket frame 0.99 x 0.74 m, steel, galvanised
UNIFIX DS bracket frame 0.99 x 0.74 m, steel,...
- innovative special component - the DS bracket frame with its construction height of 0.99 m also serves as an adjustment frame, its use makes additional adjustment frames obsolete
€142.70 *
NEW
UNIFIX assembly frame 2.00 x 1.10 m, steel, galvanised, with tilting pins and toeboard pins on both sides
UNIFIX assembly frame 2.00 x 1.10 m, steel,...
with 10 pins for deck suspension, basic component for construction of the façade scaffolding, pressed-in tube connectors allow stacking of multiple components, the lower transom is intended to retain the decking of the next storey level...
€148.95 *
NEW
UNIFIX assembly frame 2.00 x 0.74 m, steel, galvanised, lightweight, with tilting pins and toeboard pins on both sides
UNIFIX assembly frame 2.00 x 0.74 m, steel,...
- with 8 pins for suspending the decks - basic component for the construction of the façade scaffolding - pressed-in tube connectors allow stacking one above the other - lower transom serves to prevent decks of storey level below from...
€111.80 *