Couplers for the UNIFIX façade scaffolding system

In scaffolding, couplers mainly serve to connect and anchor scaffolding systems. However, they are also used in special structures. The couplers used comply with the DIN EN 74 standard and have the respective manufacturer approval. Screw couplers must be tightened with a torque of 50 Nm.

In scaffolding, couplers mainly serve to connect and anchor scaffolding systems. However, they are also used in special structures. The couplers used comply with the DIN EN 74 standard and have... read more »
Close window
Couplers for the UNIFIX façade scaffolding system

In scaffolding, couplers mainly serve to connect and anchor scaffolding systems. However, they are also used in special structures. The couplers used comply with the DIN EN 74 standard and have the respective manufacturer approval. Screw couplers must be tightened with a torque of 50 Nm.

Close filters
from to
No results were found for the filter!
NEW
Standard coupler 48/48
Standard coupler 48/48
- for right-angle connections
€8.70 *
NEW
Swivel coupler 48/48
Swivel coupler 48/48
- for connections at any angle
€10.80 *
NEW
Half-coupler
Half-coupler
- with collar nut
€8.60 *
NEW
Combination coupler
Combination coupler
- with threaded bolt M 16 x 120 mm, with washer 60 x 60 and nuts M 16
€15.60 *
NEW
Claw coupler
Claw coupler
- claw opening 35 mm
€14.70 *
NEW
Universal tube connector 0.24 m, clampable
Universal tube connector 0.24 m, clampable
- consists of 2 half-shells and screws - expanded by screw - for connecting tubes subject to impact stress
€11.05 *
NEW
Tube connector for tension coupler
Tube connector for tension coupler
- for tension couplers
€5.40 *
NEW
Tension coupler 48/48
Tension coupler 48/48
- with collar nut
€14.00 *
NEW
Halfcoupler with toeboard bolt
Halfcoupler with toeboard bolt
- steel, hot-dip galvanised
€14.30 *
NEW
Squared timber coupler
Squared timber coupler
- plate: 100 x 220 x 80 mm - with swivel halfcouplers and 4 boreholes 12 mm
€19.10 *
NEW
Halfcoupler with hook
Halfcoupler with hook
- steel, hot-dip galvanised
€13.70 *
NEW
UNIFIX anchor coupler 48/- WS 22
UNIFIX anchor coupler 48/- WS 22
allows anchorage despite installed bracket on the same level
€12.65 *
NEW
Putlog coupler
Putlog coupler
- for fixing the eaves ledger / guardrail
From €7.00 *
NEW
Distance coupler WS 22
Distance coupler WS 22
to connect two assembly frames in case of specific axial distances
€18.80 *
NEW
Hexagon bolt
Hexagon bolt
- for use as safety bolt in connection with hexagon acorn nut
From €0.80 *
NEW
Hexagon dimed cap nut M 14, steel, galvanised
Hexagon dimed cap nut M 14, steel, galvanised
steel, hot-dip galvanised
€1.25 *
NEW
T-bolt M14 x 78 mm, hot-dip galvanised
T-bolt M14 x 78 mm, hot-dip galvanised
steel, hot-dip galvanised, required when using couplers
€0.65 *
NEW
Collar nut M14, WS 22, hot-dip galvanised
Collar nut M14, WS 22, hot-dip galvanised
steel, hot-dip galvanised, required when using couplers
€0.65 *
NEW
Standard reduction coupler
Standard reduction coupler
- steel, hot-dip galvanised
€16.50 *