No results were found for the filter!
NEW
UNIFIX suspension deck bearer, steel, galvanised
- with pins for the suspension of system decks and two tilting pins for diagonal fixation - for building the lower platform of suspended scaffoldings and for cantilevers - structural certificate required in each individual case
From €72.65
*
NEW
UNIFIX bracket, steel, galvanised, with tube...
- serve to widen or extend the scaffolding in- and outwards / with pins for suspending system decks - for minimizing the wall distance e.g. in case of insulation works - in connection with the steel intermediate deck - for widening the...
From €61.20
*
NEW
UNIFIX bracket, steel, galvanised, with 2 tube...
- serve to widen or extend the scaffolding in- and outwards / with pins for suspending system decks - for minimizing the wall distance e.g. in case of insulation works - in connection with the steel intermediate deck - for widening the...
From €104.05
*
NEW
NEW
NEW
UNIFIX extension bracket, steel, galvanised,...
- for extending or shortening the scaffolding bay in accordance with the grid size by 0.50 or 1.00 m respectively - for accommodating solid wood planks of 0.50 m or 1.00 m, a deck transom is required
From €72.40
*
NEW
NEW
UNIFIX lattice girder, steel, galvanised
- system-independent assembly in the façade scaffolding for construction-related bridging purposes (passages, etc.) - load-bearing capacity depends on material and bridging length - for load-bearing capacity table please refer to...
From €203.80
*
NEW
UNIFIX lattice girder, aluminium
- system-independent assembly in the façade scaffolding for construction-related bridging purposes (passages, etc.) - load-bearing capacity depends on material and bridging length - for load-bearing capacity table please refer to...
From €221.35
*
NEW
UNIFIX lattice girder cross brace, steel,...
- includes 2 linchpins - for use with bridging constructions in the façade scaffolding -lift-off prevention with safety bolts - for use with system-independent lattice girders as an alternative to screwed half frames
From €147.60
*
NEW
UNIFIX lattice girder suspension, steel,...
- for fixing system-independent lattice girders to the assembly frames in case of standard bridging
€46.05
*
NEW
UNIFIX anchor coupler 48/- WS 22
allows anchorage despite installed bracket on the same level
€17.90
*
NEW
NEW
NEW
NEW
NEW
T-bolt M14 x 78 mm, hot-dip galvanised
steel, hot-dip galvanised, required when using couplers
€0.95
*
NEW
Collar nut M14, WS 22, hot-dip galvanised
steel, hot-dip galvanised, required when using couplers
€0.75
*
NEW
UNIFIX protective roof bracket 0.60 x 0.30 m,...
- use in connection with bracket and diagonal cross brace / can be used at every height - a protective wall can be constructed by vertically installing system decks
€42.90
*
NEW
NEW
Scaffold post 3.00 - 5.00 m, telescopic, steel,...
- support of free standing scaffoldings with platform heights of up to 6.00 m - integrated stiffening for secure connection to scaffolding - locking pin to easily fix the diagonal tube in different extension lengths
€240.05
*
NEW
PPE Premium scaffolding kit, size L/XL
- special carabiner for use with scaffoldings - comes in useful pvc device bag - safety harness Revolution R2 Scaff, 2.50 m, safety rope Manyard Edge
€398.65
*
NEW
Ratchet spanner holster
- with integrated Pivot Link attachment point for secure attachment to safety harness
€54.75
*
NEW
Base jack 0.60 m, steel, galvanised, swivelling
- galvanized - base plate 15 x 15 cm - threaded tube 38 mm
€49.95
*