No results were found for the filter!
NEW
Castor 0.50 m, steel, 10 KN, ø 200 mm, galvanised
- max. load capacity: 10kN - with twin break - centric load transfer - with thread for continuing height adjustment - secured by means of wing screw
€135.80
*
NEW
UNIFIX diagonal brace for bay height 1.00 m,...
- suspension by means of tilting pins of the assembly frames - steel tube ø 42.4 mm or ø 57.0 (for a 4.00 m bay) - for vertical stiffening of the scaffolding
From €28.40
*
NEW
UNIFIX transom with couplers, steel, galvanised
- with pins for the suspension of system decks and 2 halfcouplers - for constructing a bearing surface for intermediate heights in the assembly frame
From €41.65
*
NEW
UNIFIX transition deck bearer 1.10 m, steel,...
- constitutes the transition from scaffolding width 1.10 m to 0.74, e.g. with façade projections / is fitted onto assembly frame 1.10 m
€41.65
*
NEW
UNIFIX platform transom, steel, galvanised
- with pins for the suspension of system decks and 2 halfcouplers / for constructing level surfaces between assembly frames
From €51.75
*
NEW
UNIFIX suspension deck bearer, steel, galvanised
- with pins for the suspension of system decks and two tilting pins for diagonal fixation - for building the lower platform of suspended scaffoldings and for cantilevers - structural certificate required in each individual case
From €58.10
*
NEW
Base jack 0.60 m, steel, galvanised, swivelling
- galvanized - base plate 15 x 15 cm - threaded tube 38 mm
€39.95
*
NEW
Distance tube, steel, galvanised
- assembly with 2 standard couplers on both upright tubes for lengths of 1.00 m and above - with borehole for locking by means of linchpin - EIFS anchor sleeve required for lengths of 1.00 m and above
From €11.15
*
NEW
ALBLITZ base jack, steel, galvanised
- with smooth running tube spindle and toggle nut - locking function to prevent unfastening - base plate 15 x 15 cm - threaded tube 38 mm - max. spindle travel 0.25 m
From €16.25
*
NEW
Spacer tube 1.80 m, steel, galvanised
- adjustment function, e.g. with downward stairway - multiple height adjustment possibilities thanks to 120 mm hole raster - secured by means of locking pin
€38.70
*
NEW
NEW
Rolling beam, mobile and universally...
- with 2 displaceable tube connectors for system-independent use
From €73.55
*
NEW
UNIFIX diagonal brace for bay height 2.00 m,...
- suspension by means of tilting pins of the assembly frames - steel tube ø 42.4 mm or ø 57.0 (for a 4.00 m bay) - for vertical stiffening of the scaffolding
From €27.00
*
NEW
UNIFIX lower diagonal brace fixture, steel,...
- serves as lower suspension for diagonal braces or for accommodating guardrails used as horizontal strut
€7.00
*
NEW
UNIFIX quick-release anchor 0.70 m, steel,...
- with hooks and guide plate to secure against rotation - for suspension below the deck transom
€19.75
*
NEW
UNIFIX rolling beam 2.00 m, steel, galvanised
- for erecting mobile scaffoldings -with differently arranged tube connectors for central and lateral scaffolding
€137.05
*