No results were found for the filter!
NEW
Linchpin 8 x 60 mm, steel, galvanised
to secure the connection of plug-in type scaffolding components
€1.80
*
NEW
Castor 0.50 m, steel, 10 KN, ø 200 mm, galvanised
- max. load capacity: 10kN - with twin break - centric load transfer - with thread for continuing height adjustment - secured by means of wing screw
€169.80
*
NEW
UNIFIX assembly frame with tilting pins on one...
- with 8 pins for suspending the decks - basic component for the construction of the façade scaffolding - pressed-in tube connectors allow stacking one above the other - lower transom serves to prevent decks of storey level below from...
From €90.70
*
NEW
UNIFIX assembly frame 0.74 m, aluminium
- with 8 pins for suspending the decks - basic component for the construction of the façade scaffolding - pressed-in tube connectors allow stacking one above the other - lower transom serves to prevent decks of storey level below from...
From €120.15
*
NEW
UNIFIX assembly frame 1.10 m, steel, galvanised
- basic component for the construction of the façade scaffolding - pressed-in tube connectors allow stacking of multiple components - lower transom serves to prevent decking of storey level below from lifting off - U-profile for deck...
From €107.55
*
NEW
UNIFIX solid aluminium deck 0.32 m
- profile height 48 mm - hollow chamber profiles with anti-slip longitudinal grooves - easily stackable due to stacking bulge - stacking bulge faces downwards which prevents water or ice deposits
From €116.55
*
NEW
UNIFIX gap cover, wood, 0.14 m
- to be installed between decks - for or covering construction-related gaps with bracket levels
From €68.90
*
NEW
NEW
Internal guardrail for ALBLITZ/UNIFIX aluminium...
- for use with aluminium stairways - for constructions with alternating flights of stairs - with linchpin 12 x 70 mm with snap-in lock
€148.95
*
NEW
UNIFIX stair guardrail, 2.00 m, steel, galvanised
- for use with aluminium stairway - with system fixture
From €103.65
*
NEW
UNIFIX starter transom, steel, galvanised
- serves as starting element for stairways and for creating a bottom deck surface for storey ladders
From €55.60
*
NEW
NEW
UNIFIX guardrail, steel, galvanised
- for erecting the side protection - for fastening to tilting pins - available for all bay lengths - guardrail can also be used as horizontal strut
From €18.35
*
NEW
UNIFIX end guardrail, single, steel, galvanised
- for use as side protection at the end sides
From €26.10
*
NEW
UNIFIX end guardrail frame 1.00 m, steel,...
- constitutes the side protection at the ends and lift-off preventer of decks on the upper level
From €84.20
*
NEW
UNIFIX end guardrail frame 1.00 x 0.74 m,...
- constitutes the side protection at the ends and lift-off preventer of decks on the upper level
€119.80
*
NEW
UNIFIX guardrail post 1.00 m, steel,...
- simultaneously serves as upper lift-off preventer
From €49.30
*
NEW
UNIFIX guardrail post 1.00 x 0.74 m, steel,...
- simultaneously serves as upper lift-off preventer
€54.90
*
NEW
UNIFIX guardrail post upper part 1.00 m, steel,...
- for extending and fitting onto guardrail posts without tube connector
€37.40
*
NEW
UNIFIX internal guardrail holder 1.00 m, steel,...
- with 2 tilting pins and toeboard pins - allows for rapid assembly of internal three-part side protection
€50.65
*
NEW
UNIFIX guardrail post 1.00 m, single, steel,...
with tilting pins to attach guardrails
From €33.10
*
NEW
UNIFIX upper lift-off preventer, steel, galvanised
- in connection with basic guardrail post - one side with ø 48.3 mm sleeve with locking screw· one side with ø 57 mm sleeve for accommodating the guardrail post single
From €27.45
*
NEW
UNIFIX diagonal brace for bay height 1.00 m,...
- suspension by means of tilting pins of the assembly frames - steel tube ø 42.4 mm or ø 57.0 (for a 4.00 m bay) - for vertical stiffening of the scaffolding
From €35.55
*
NEW
UNIFIX transition deck bearer 1.10 m, steel,...
- constitutes the transition from scaffolding width 1.10 m to 0.74, e.g. with façade projections / is fitted onto assembly frame 1.10 m
€52.10
*