- with pins for the suspension of system decks and two tilting pins for diagonal fixation - for building the lower platform of suspended scaffoldings and for cantilevers - structural certificate required in each individual case

- serve to widen or extend the scaffolding in- and outwards / with pins for suspending system decks - for minimizing the wall distance e.g. in case of insulation works - in connection with the steel intermediate deck - for widening the...

- serve to widen or extend the scaffolding in- and outwards / with pins for suspending system decks - for minimizing the wall distance e.g. in case of insulation works - in connection with the steel intermediate deck - for widening the...

- for extending or shortening the scaffolding bay in accordance with the grid size by 0.50 or 1.00 m respectively - for accommodating solid wood planks of 0.50 m or 1.00 m, a deck transom is required

- for extension bracket

- system-independent assembly in the façade scaffolding for construction-related bridging purposes (passages, etc.) - load-bearing capacity depends on material and bridging length - for load-bearing capacity table please refer to...

- system-independent assembly in the façade scaffolding for construction-related bridging purposes (passages, etc.) - load-bearing capacity depends on material and bridging length - for load-bearing capacity table please refer to...

- includes 2 linchpins - for use with bridging constructions in the façade scaffolding -lift-off prevention with safety bolts - for use with system-independent lattice girders as an alternative to screwed half frames

- for fixing system-independent lattice girders to the assembly frames in case of standard bridging

allows anchorage despite installed bracket on the same level

- for fixing the eaves ledger / guardrail

to connect two assembly frames in case of specific axial distances

- for use as safety bolt in connection with hexagon acorn nut

steel, hot-dip galvanised

steel, hot-dip galvanised, required when using couplers

steel, hot-dip galvanised, required when using couplers

- use in connection with bracket and diagonal cross brace / can be used at every height - a protective wall can be constructed by vertically installing system decks

- steel, hot-dip galvanised

- support of free standing scaffoldings with platform heights of up to 6.00 m - integrated stiffening for secure connection to scaffolding - locking pin to easily fix the diagonal tube in different extension lengths

- special carabiner for use with scaffoldings - comes in useful pvc device bag - safety harness Revolution R2 Scaff, 2.50 m, safety rope Manyard Edge

- with integrated Pivot Link attachment point for secure attachment to safety harness

- galvanized - base plate 15 x 15 cm - threaded tube 38 mm