- serve to widen or extend the scaffolding in- and outwards / with pins for suspending system decks - for minimizing the wall distance e.g. in case of insulation works - in connection with the steel intermediate deck - for widening the...

- with special design locking pin - for obstacle-free circulation at an internal corner façade scaffolding - allows for use of system components for the side protection instead of tube coupler constructions

- steel tube ø 48.3 mm - with 4 welded-on halfcouplers and welded tube connectors for accommodating the assembly frames for further construction in the scaffolding standard dimension

- screwed onto lattice girder - serves to accommodate system decks for constructing areal scaffoldings

- add-on unit as easy weather protection on façade scaffoldings - connection of multiple weather protection supports below on another is done by means of guardrail

- for mounting onto assembly frames of system width 0.74 m - fastening of the scaffolding protection tarpaulin by means of cable ties - connection of multiple weather protection add-on units among each other by means of guardrail - roof...

- safety equipment for constructing/disassembling scaffoldings - for all compatible scaffolding systems

- with claws - for use with system decks - fixing by means of toeboard support or deck lift-off preventer - version: impregnated wood

- made of impregnated wood - attached to toeboard pins or toeboard coupler - with claws

via article description

- with pins for the suspension of system decks and 2 halfcouplers - for constructing a bearing surface for intermediate heights in the assembly frame

with 10 pins for deck suspension, basic component for construction of the façade scaffolding, pressed-in tube connectors allow stacking of multiple components, the lower transom is intended to retain the decking of the next storey level...

- with 6 tilting pins each for fixing safety nets or guard net systems - for use in roof fall arrest and brick guard scaffolds

- for lateral fall protection of circulating bay when using aluminium stairways

- with 8 pins for suspending the decks - basic component for the construction of the façade scaffolding - pressed-in tube connectors allow stacking one above the other - lower transom serves to prevent decks of storey level below from...