No results were found for the filter!
NEW
- max. load capacity: 10kN - with twin break - centric load transfer - with thread for continuing height adjustment - secured by means of wing screw
€169.80
*
NEW
- suspension by means of tilting pins of the assembly frames - steel tube ø 42.4 mm or ø 57.0 (for a 4.00 m bay) - for vertical stiffening of the scaffolding
From €35.55
*
NEW
- constitutes the transition from scaffolding width 1.10 m to 0.74, e.g. with façade projections / is fitted onto assembly frame 1.10 m
€52.10
*
NEW
- with pins for the suspension of system decks and 2 halfcouplers / for constructing level surfaces between assembly frames
From €64.70
*
NEW
- with pins for the suspension of system decks and two tilting pins for diagonal fixation - for building the lower platform of suspended scaffoldings and for cantilevers - structural certificate required in each individual case
From €72.65
*
NEW
- galvanized - base plate 15 x 15 cm - threaded tube 38 mm
€49.95
*
NEW
- assembly with 2 standard couplers on both upright tubes for lengths of 1.00 m and above - with borehole for locking by means of linchpin - EIFS anchor sleeve required for lengths of 1.00 m and above
From €13.95
*
NEW
- with smooth running tube spindle and toggle nut - locking function to prevent unfastening - base plate 15 x 15 cm - threaded tube 38 mm - max. spindle travel 0.25 m
From €20.35
*
NEW
- adjustment function, e.g. with downward stairway - multiple height adjustment possibilities thanks to 120 mm hole raster - secured by means of locking pin
€48.40
*
NEW
NEW
- suspension by means of tilting pins of the assembly frames - steel tube ø 42.4 mm or ø 57.0 (for a 4.00 m bay) - for vertical stiffening of the scaffolding
From €33.80
*
NEW
- serves as lower suspension for diagonal braces or for accommodating guardrails used as horizontal strut
€8.80
*
NEW
- for erecting mobile scaffoldings -with differently arranged tube connectors for central and lateral scaffolding
€171.35
*
NEW
- with pins for the suspension of system decks and 2 halfcouplers - for constructing a bearing surface for intermediate heights in the assembly frame
From €52.10
*
NEW
- with hooks and guide plate to secure against rotation - for suspension below the deck transom
€24.70
*