- for right-angle connections

- for connections at any angle

- with collar nut

- claw opening 35 mm

- consists of 2 half-shells and screws - expanded by screw - for connecting tubes subject to impact stress

- for tension couplers

- with collar nut

- plate: 100 x 220 x 80 mm - with swivel halfcouplers and 4 boreholes 12 mm

serves as lift-off prevention for the locking pin when 2 steel planks are connected

- ø 48.3 x 3.25 mm - up to 6 m - hot-dip galvanised

steel, hot-dip galvanised

- with integrated halfcoupler WS 19 - for all scaffolding systems up to deck widths 0.65 and 1.00 m

- max. load capacity: 10kN - with twin break - centric load transfer - with thread for continuing height adjustment - secured by means of wing screw

- profile height 48 mm - hollow chamber profiles with anti-slip longitudinal grooves - easily stackable due to stacking bulge - stacking bulge faces downwards which prevents water or ice deposits

- for use with aluminium stairways - for constructions with alternating flights of stairs - with linchpin 12 x 70 mm with snap-in lock

- for lateral fall protection of circulating bay when using aluminium stairways

- for extension bracket

- for use as safety bolt in connection with hexagon acorn nut

steel, hot-dip galvanised

- with integrated Pivot Link attachment point for secure attachment to safety harness

- steel tube 48.3 x 3.2 mm - rosettes at 50 cm intervals - distance between lower edge tube and first rosette 400 mm

- steel tube 48.3 x 3.2 mm - for suspended scaffolding - special screws included - rosettes at 50 cm intervals - distance between lower edge tube and first rosette 400 mm