- with wedge lock connection to ensure positive and non-positive connections· without screw connections - for stiffening the basic scaffolding

- with wedge lock connection to ensure positive and non-positive connections· without screw connections - for stiffening the basic scaffolding

- with wedge lock connection to ensure positive and non-positive connections· without screw connections - for stiffening the basic scaffolding

- available for any combination of [bay length] x [bay width]· pin suspension, no screws - stiffening of horizontal levels in scaffoldings without decks

- available for any combination of [bay length] x [bay width]· pin suspension, no screws - stiffening of horizontal levels in scaffoldings without decks

- available for any combination of [bay length] x [bay width]· pin suspension, no screws - stiffening of horizontal levels in scaffoldings without decks

- with wedge lock connection to ensure positive and non-positive connection· without screw connections - for stiffening the horizontal levels in birdcage scaffoldings

- with cylindrical tube support - with integrated deck lift-off preventer

- offset hatch with exit step - with weatherproof film-coated plywood surface

- offset hatch with exit step - decking aluminium tread plate - extremely durable and weatherproof - exchangeable suspensions and deckings

- for system decks - for covering construction-related gaps with bracket levels - fitted onto tube ledger - In case decks with tube suspension are used, a separate gap cover is required!

- for bridging or areal scaffoldings - for direct connection to the rosette with 4 wedge heads,- upon request MODUL lattice girder with welded-on tube connector - top chord for suspending system decks - bottom chord steel tube 48.3 mm

- for bridging in the MODUL façade scaffolding:- lift-off prevention by means of safety bolts - flexible alternative to lattice girders with welded-on tube connectors

- with linchpin - for fitting onto U-profiles or tubes - lift-off prevention with safety bolt

- for use on tube ledgers or MODUL lattice girders with top chord for variable MODUL arrangement of standards

- for use on tube ledgers or MODUL lattice girders with top chord for variable MODUL arrangement of standards

- for attaching tube ledgers as side protection whilst simultaneously allowing for a passage - with 2 rosettes and toeboard holders

- with UNIFIX-support for system decks - max. load-bearing capacity 200 kg/m² (load class 3)

- hot-dip galvanised - compensation element for stairway towers - allows for constant step dimension in accordance with the regulations

- with integrated locking mechanism (self-locking) - for securing accesses, e.g. in stairway towers

- compensation element for stairway towers - allows for constant step dimension in accordance with the regulations

- reinforced with aluminium box sections 55 x 55 mm - for covering gaps between deck levels when using deck bearers and double ledgers with UNIFIX-support - aluminium treadplate

- with system fixture - width 0.64 m:-10 inclinations of 20 cm each,- load-bearing capacity max. 2kN/m² (load class 3) - for use with platform stairway tower

serves as fall protection on the top platform (4-standard stairway tower applications), steel, hot-dip galvanised