- EIFS thickness up to 220 mm - for anchoring façade scaffoldings to buildings for which ETICS is required / has already been mounted - anchoring generally required only at every 4th-5th anchor point - can be removed completely and...

- with installation depth marking - ring hole diameter 25 mm - wooden thread

steel, hot-dip galvanised

to indicate the anchorage point

- serves simultaneously as upper lift-off preventer on bracket level 0.36 m - patented locking mechanism for guardrail

- for right-angle connections

- for connections at any angle

- with collar nut

- steel, hot-dip galvanised

- with threaded bolt M 16 x 120 mm, with washer 60 x 60 and nuts M 16

- claw opening 35 mm

- for tension couplers

- with collar nut

- steel, hot-dip galvanised

- plate: 100 x 220 x 80 mm - with swivel halfcouplers and 4 boreholes 12 mm

- steel, hot-dip galvanised

- steel

- system-independent assembly in the façade scaffolding for construction-related bridging purposes (passages, etc.) - load-bearing capacity depends on material and bridging length - for load-bearing capacity table please refer to...

- system-independent assembly in the façade scaffolding for construction-related bridging purposes (passages, etc.) - load-bearing capacity depends on material and bridging length - for load-bearing capacity table please refer to...

- with 4 screws M 14 x 65 mm and nuts M14

- version with U-profile, 120 mm - for fixation at the ends of lattice girders to buildings, mainly for special solutions - fixation in accordance with anchorage ground and load, proof required for each individual case

- with halfcoupler - with welded-on fixture for ALFIX pulley

- with cross-bar and rotatable load hook with hook protection or with carabiner:- suitable for ropes up to ø 28mm - allowable tension load 200 kg

- ø 48.3 x 3.25 mm - up to 6 m - hot-dip galvanised