- hot-dip galvanised - with 2 detachable combination couplers and hole raster for fixing additional combination couplers and for flexible fixing to roof girder

- suitable for fitting tarpaulins to roofs and walls - metal eyelets at the ends on both sides at intervals of 50 cm - 590 g/m², flame-retardant - strap with steel eyelet

- hot-dip galvanised - for the construction of mobile Keder halls - with integrated lift-off prevention - limited compensation for construction inaccuracies in transverse direction

- hot-dip galvanised - for constructing mobile double pitch roofs,- with integrated lift-off preventer - limited compensation for construction inaccuracies in transverse direction

- for mobile constructions - stiffening by means of longitudinal and diagonal ledgers

- with halfcoupler to wheel axle on one side for track stability - max. load-bearing capacity 10kN

- for use with mobile roof constructions - high-quality, lightweight, aluminium, continuous casting profile - lateral eyelets for permanent lift-off prevention

- hot-dip galvanised - add-on unit for façade scaffoldings - allows for installation of a bearing plate

- steel construction with 2 halfcouplers - easy installation in façade scaffolding or Modul scaffolding

- stopper for securing rolling roofs - steel construction with shock absorbing plastic bumper - steel, hot-dip galvanised

- serves to secure against unintended displacing for mobile roof constructions with rail - steel, hot-dip galvanised

- 360 x 80 x 10 mm - for tubes 48.3 mm

n.v.

- with tilting pin - 100 x 50 x 8 mm

also allows for a screwed connection of roof girder to roof girder corner sections

- hexagon socket

for waterproof sealing of butting roof girders

- for sealing butted wedge profiles

- minimum breaking load 23 daN - packaging unit 100 pieces

- lashing strap with ratchet to secure loads, allowable tension load in the strapping 2000 daN - 35 mm strap

- with clamp - 4 shafts - diameter = 8.00 mm

- for rapid mounting of protective nets - packaging unit 50 pieces - breaking load 750 daN

- continuous fitting of Keder rails to scaffolding - distance between the Keder holders max. 2.00 m