Keder rail system for the ALFIX temporary roof VARIO

The Keder rail system supplements the ALFIX temporary roof product range. In conjunction with the ALFIX Temporary Roof VARIO, the Keder rail system can be used for wall cladding of enclosures. Keder rails are fitted every 2 m by means of the Keder rail holder. The holder functions like locking pliers. It is fitted positively and non-positively to the Keder rail by means of a hammer blow to the wedge. Due to its design and the possibility to fit the Keder rail holder continuously to scaffolding and Keder rail it is possible to assemble the holder at any time during construction, and also at a later stage.

The Keder rail system supplements the ALFIX temporary roof product range. In conjunction with the ALFIX Temporary Roof VARIO, the Keder rail system can be used for wall cladding of enclosures.... read more »
Close window
Keder rail system for the ALFIX temporary roof VARIO

The Keder rail system supplements the ALFIX temporary roof product range. In conjunction with the ALFIX Temporary Roof VARIO, the Keder rail system can be used for wall cladding of enclosures. Keder rails are fitted every 2 m by means of the Keder rail holder. The holder functions like locking pliers. It is fitted positively and non-positively to the Keder rail by means of a hammer blow to the wedge. Due to its design and the possibility to fit the Keder rail holder continuously to scaffolding and Keder rail it is possible to assemble the holder at any time during construction, and also at a later stage.

Close filters
from to
No results were found for the filter!
NEW
UNIFIX guardrail, steel, galvanised
UNIFIX guardrail, steel, galvanised
- for erecting the side protection - for fastening to tilting pins - available for all bay lengths - guardrail can also be used as horizontal strut
From €13.00 *
NEW
Keder rail holder, steel, galvanised
Keder rail holder, steel, galvanised
- continuous fitting of Keder rails to scaffolding - distance between the Keder holders max. 2.00 m
€26.30 *
NEW
VARIO Keder rail holder 360° rotatable, steel, with halfcoupler WS 19, for scaffolding tubes ø 48.3 mm
VARIO Keder rail holder 360° rotatable, steel,...
continuously variable attachment of the Keder rail onto the scaffolding, Keder holder separation max. 2.00 m, 360° rotatable
€28.35 *
NEW
VARIO Keder rail 0.50 m, aluminium, with tilting pin
VARIO Keder rail 0.50 m, aluminium, with...
for attaching the eaves ledgers, in order to fasten the roof tarpaulin to the eaves section also when using Keder rails· if an eaves ledger connection is inserted into the upper profile of the Keder rail, the wall tarpaulin can be...
€17.95 *
NEW
VARIO Keder rail with 2 boreholes, aluminium
VARIO Keder rail with 2 boreholes, aluminium
- with boreholes on both sides for accommodating Keder rail longitudinal connectors - very stable aluminium profile, allowing for fewer connection points at scaffolding
From €54.30 *
NEW
VARIO Keder rail wall profile, aluminium, with 2 boreholes per side
VARIO Keder rail wall profile, aluminium, with...
- double Keder nut on each side - matching Keder profile connector Nr. 4799011
From €87.05 *
NEW
Keder rail longitudinal connector 300 x 50 mm, steel, galvanised, incl. 4 bolts M12 x 50 mm and 4 nuts M12
Keder rail longitudinal connector 300 x 50 mm,...
- with 4 screws M 12 x 50 and 4 nuts M 12 - with 4 boreholes 14 mm - for connecting Keder rails in longitudinal direction
€17.55 *
NEW
VARIO eave ledger 2.57 m, steel
VARIO eave ledger 2.57 m, steel
- serves as fixing point on the eaves side for Keder tarpaulins - fixing with putlog coupler, eaves ledger connection or Keder rail with tilting pin
€19.95 *