- with halfcoupler - with welded-on fixture for ALFIX pulley

- with cross-bar and rotatable load hook with hook protection or with carabiner:- suitable for ropes up to ø 28mm - allowable tension load 200 kg

- for use in connection with bracket and diagonal cross brace - forms a protective wall when system decks are assembled in an upright way - for use at every height

- steel, hot-dip galvanised

- ø 48.3 x 3.25 mm - up to 6 m - hot-dip galvanised

to secure the telescopic scaffold stabiliser to the ground

- add-on unit as easy weather protection on façade scaffoldings - connection of multiple weather protection supports by means of guardrail

- to be assembled on top of assembly frame with system width 0.73 m· connection of multiple weather protection add-on units by means of guardrail - roof elements for receiving the protective scaffolding tarpaulins - fixing of protective...

- with U-profile for accommodating system decks - when using 4 renovating trestles, three aluminium frame platforms can be suspended in parallel

steel, hot-dip galvanised

- with integrated halfcoupler WS 19 - for all scaffolding systems up to deck widths 0.65 and 1.00 m

to secure the connection of plug-in type scaffolding components

- for the lower horizontal connection in a diagonal bay

- stiffening of scaffolding - Alignment of assembly frames possible for single-sided suspension in gusset, except for bay length 1.57 m and 4.14 m

- max. load capacity: 10kN - with twin break - centric load transfer - with thread for continuing height adjustment - secured by means of wing screw

- with 8 pins for suspending the decks - basic component for the construction of the façade scaffolding - pressed-in tube connectors allow stacking one above the other - lower transom serves to prevent decks of storey level below from...

- with 8 pins for suspending the decks - basic component for the construction of the façade scaffolding - pressed-in tube connectors allow stacking one above the other - lower transom serves to prevent decks of storey level below from...

- basic component for the construction of the façade scaffolding - pressed-in tube connectors allow stacking of multiple components - lower transom serves to prevent decking of storey level below from lifting off - U-profile for deck...

- profile height 48 mm - hollow chamber profiles with anti-slip longitudinal grooves - easily stackable due to stacking bulge - stacking bulge faces downwards which prevents water or ice deposits

- to be installed between decks - for or covering construction-related gaps with bracket levels

- for use with aluminium stairways - for constructions with alternating flights of stairs - with linchpin 12 x 70 mm with snap-in lock

- for use with aluminium stairway - with system fixture

- serves as starting element for stairways and for creating a bottom deck surface for storey ladders