- EIFS thickness up to 220 mm - for anchoring façade scaffoldings to buildings for which ETICS is required / has already been mounted - anchoring generally required only at every 4th-5th anchor point - can be removed completely and...

- with installation depth marking - ring hole diameter 25 mm - wooden thread

to indicate the anchorage point

- for right-angle connections

- for connections at any angle

- with collar nut

- with threaded bolt M 16 x 120 mm, with washer 60 x 60 and nuts M 16

- claw opening 35 mm

- consists of 2 half-shells and screws - expanded by screw - for connecting tubes subject to impact stress

- for tension couplers

- with collar nut

- steel, hot-dip galvanised

- plate: 100 x 220 x 80 mm - with swivel halfcouplers and 4 boreholes 12 mm

- steel, hot-dip galvanised

- with 4 screws M 14 x 65 mm and nuts M14

- with boreholes for locking pins

- version with U-profile, 120 mm - for fixation at the ends of lattice girders to buildings, mainly for special solutions - fixation in accordance with anchorage ground and load, proof required for each individual case

serves as lift-off prevention for the locking pin when 2 steel planks are connected

- with halfcoupler - with welded-on fixture for ALFIX pulley

- with cross-bar and rotatable load hook with hook protection or with carabiner:- suitable for ropes up to ø 28mm - allowable tension load 200 kg

- ø 48.3 x 3.25 mm - up to 6 m - hot-dip galvanised

to secure the telescopic scaffold stabiliser to the ground

steel, hot-dip galvanised

- with integrated halfcoupler WS 19 - for all scaffolding systems up to deck widths 0.65 and 1.00 m