Close filters
from to
3 From 3
No results were found for the filter!
NEW
Keder rail holder, steel, galvanised
Keder rail holder, steel, galvanised
- continuous fitting of Keder rails to scaffolding - distance between the Keder holders max. 2.00 m
€26.30 *
NEW
VARIO Keder rail holder 360° rotatable, steel, with halfcoupler WS 19, for scaffolding tubes ø 48.3 mm
VARIO Keder rail holder 360° rotatable, steel,...
continuously variable attachment of the Keder rail onto the scaffolding, Keder holder separation max. 2.00 m, 360° rotatable
€28.35 *
NEW
VARIO Keder rail 0.50 m, aluminium, with tilting pin
VARIO Keder rail 0.50 m, aluminium, with...
for attaching the eaves ledgers, in order to fasten the roof tarpaulin to the eaves section also when using Keder rails· if an eaves ledger connection is inserted into the upper profile of the Keder rail, the wall tarpaulin can be...
€17.95 *
NEW
VARIO Keder rail with 2 boreholes, aluminium
VARIO Keder rail with 2 boreholes, aluminium
- with boreholes on both sides for accommodating Keder rail longitudinal connectors - very stable aluminium profile, allowing for fewer connection points at scaffolding
From €54.30 *
NEW
VARIO Keder rail wall profile, aluminium, with 2 boreholes per side
VARIO Keder rail wall profile, aluminium, with...
- double Keder nut on each side - matching Keder profile connector Nr. 4799011
From €87.05 *
NEW
Keder rail longitudinal connector 300 x 50 mm, steel, galvanised, incl. 4 bolts M12 x 50 mm and 4 nuts M12
Keder rail longitudinal connector 300 x 50 mm,...
- with 4 screws M 12 x 50 and 4 nuts M 12 - with 4 boreholes 14 mm - for connecting Keder rails in longitudinal direction
€17.55 *
NEW
VARIO eave ledger 2.57 m, steel
VARIO eave ledger 2.57 m, steel
- serves as fixing point on the eaves side for Keder tarpaulins - fixing with putlog coupler, eaves ledger connection or Keder rail with tilting pin
€19.95 *
3 From 3